Estimate how much metal powder, wire, filament or resin a 3D printed part will consume, including supports and waste.
Enter the part volume from your CAD model, choose a process and material, and get the printed part weight, support material, total feedstock consumed per build and an optional material cost. Defaults for supports and powder or material loss can be adjusted to match your machine and workflow.
1. Process and material
2. Part
3. Allowances
Estimate
Planning estimate only. Actual consumption depends on part orientation, nesting, support strategy, powder reuse policy and machine. Binder jet parts shrink about 15–20% per axis during sintering, so use the sintered (final) volume.
How the AM material estimate is calculated
- Part mass = part volume × material density (for FDM, × effective fill from walls and infill).
- Supports are added as a percentage of part mass. Metal powder bed parts typically need 5–25% depending on overhangs. SLS and MJF need none because the powder bed supports the part.
- Waste and loss covers powder that can’t be reused (sieving losses, spatter, refresh ratio), DED material removed in finish machining, failed prints, purge and resin left in the vat.
Typical defaults by process
| Process | Supports | Waste / loss | Notes |
|---|---|---|---|
| Laser powder bed fusion (LPBF / DMLS / SLM) | 15% | 10% | Powder is sieved and reused; loss covers spatter, oversize and degraded powder |
| Electron beam melting (EBM) | 5% | 8% | Sintered cake is recovered and reused |
| Directed energy deposition (DED / WAAM) | 0% | 35% | Near-net shape. Loss is mostly finish-machining allowance |
| Metal binder jetting | 0% | 5% | Unbound powder is highly reusable |
| FDM / FFF | 10% | 5% | Purge, brims and failed prints |
| SLS | 0% | 30% | Refresh ratio of new to used powder drives cost |
| Multi Jet Fusion (MJF) | 0% | 20% | Higher powder reusability than SLS |
| SLA / DLP resin | 15% | 5% | Supports, rafts and resin left on parts |
Sourcing powder, wire or filament?
Search Material Harbor for AM feedstock suppliers and service bureaus with spare print capacity, or list your surplus powder and filament.
More free material tools
Subscribe to the Material Harbor Newsletter
New suppliers and materials on the platform, free engineering tools, and supply chain notes from aerospace engineers. About once a month. No spam, unsubscribe anytime.